Beagle Bone Green
Opensource Beaglebone Green, fully-compatible replacement for Beaglebone Black
- Fully compatible with Beaglebone Black.
- Updated 5V barrel connector, replaced with μUSB host.
- Boot Linux in under 10 seconds!
- Get started developing in under 5 minutes!
BeagleBone Green (BBG) is a joint effort by BeagleBoard.org and Seeed Studio. It is based on the open-source hardware design of BeagleBone Black and developed into this differentiated version. The BBG has included two Grove connectors, making it easier to connect to the large family of Grove sensors available from SeeedStudio. The on-board HDMI is removed to make room for these Grove connectors.
See the post on Hackaday.com about the Beaglebone Green.
AM335x 1GHz ARM® Cortex-A8
• 512MB DDR3 RAM
• 4GB eMMC on-board flash storage
• 3D graphics accelerator
• NEON floating-point
• Cloud9 IDE on Node
• Support much more
• USB client for power & communications
• USB host
• 2x Grove
• 2x 46 pin headers
BeagleBone Black (BBB)
BeagleBone Green (BBG)
|• Processor: AM3358 1GHz ARM® Cortex-A8||• Processor: AM3358 1GHz ARM® Cortex-A8|
|• 512MB DDR3 RAM||• 512MB DDR3 RAM|
|• 4GB 8-bit eMMC on-board flash storage||• 4GB 8-bit eMMC on-board flash storage|
|• 3D graphics accelerator||• 3D graphics accelerator|
|• NEON floating-point accelerator||• NEON floating-point accelerator|
|• 2x PRU 32-bit microcontrollers||• 2x PRU 32-bit microcontrollers|
|• USB client for power & communications||• USB client for power & communications|
|• USB host||• USB host|
|• Ethernet||• Ethernet|
|• 2x46 pin headers||• 2x46 pin headers|
|• HDMI port||• 2xGrove connectors|
* The software of BBG is fully compatible with that of BBB and existing BBB expansion boards will work with BBG.
** BBG is both CE and FCC certified.
Full schematics, factory software and the complete System Reference Manual are available on the Seeed Studio wiki.