USB Tester 2.0 Bundle

Because you've already cut up enough USB cables this month.

From $61.00

Addon items

This item is currently out of stock.
Sorry! We don't have that many in stock!

Product Info

  • USB Micro B on one end.
  • USB A on the other.
  • Test points for VCC, GND, D+ and D- in the middle.
  • Breakout for the ID pin on the micro USB connector.
  • Included OLED display and view change button.
  • Log data to any computer.

More Images

Hackaday Review

Here's a small hardware challenge for you. Plug your phone into a charger. How much current is it drawing?

The conventional method of figuring this out will, in the best case, require opening up the charger and futzing around with multimeter probes until you can get a measurement. The worst case scenario involves stripping a USB cable. The dollar store has plenty of USB cables, yes, but you get funny looks when you buy their entire stock.

This is the solution to that problem. It's a small board with a USB Micro B connector at one end, a 'normal' USB A receptacle at the other end, and test points in between. It does one thing, and it does it well. If you're down with experimenting with USB, the ID pin on the Micro B connector is also broken out. If you're developing something with USB OTG, this will make things easier.

This is the USB Tester 2.0 Bundle

In addition to a board with a USB A receptacle, a USB Micro B connector, and a few test points, you also get a very cool OLED backpack. The display on this backpack reads out the current, voltage, and wattage. It can also log the data to a computer with an accompanying app to graph the information being collected.

Assembly is a snap; just solder on the headers, and solder on the OLED module.

The logging and graphing capabilities of the backpack are incredible. With the app developed just for the USB Tester 2.0 backpack, you get live feedback of the current, voltage, wattage, and the voltage on the USB data lines. All the data can be saved to a file, allowing you to do fancy power analysis of USB peripherals. Here's a screenshot of the app itself, recording the power consumption of a Raspberry Pi (without an SD card) being unplugged, and booting again (with an SD card):

There are a ton of uses for the USB tester, and one thing we'll be doing in the future is figuring out how much power it takes to compile the Linux kernel on a Raspberry Pi. Yes, that will take many, many hours, but what an interesting example of what you can do when you're able to log current and voltage straight to a computer.

The USB Tester 2.0 was designed by FriedCircuits


 

Features

  • Monitor voltage levels.
  • Monitor current usage.
  • Monitor D+ and D- via oscilloscope.
  • Banana clip test points.
  • Jumper connections to bridge current connections when not testing/normal operation.
  • OLED data logging backpack with live readout, graphs and push button switch.
  • USB serial connection on the backpack allows logging to a computer.
  • Dangerous Prototypes Sick of Beige (DP5031) standard PCB size.

Included

  • Tester PCB with both USB ports populated.
  • 16x1 pin header (0.1" pitch, unsoldered).
  • 1 jumper.
  • USB Backpack PCB with surface mount parts populated.
  • OLED module.
  • 2 female pin sockets.

Not Included

  • USB Cables.

Disclaimer

  • The kit is tested before it leaves the factory, but please keep in mind that the kit is still experimental, unproven hardware. This hardware is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Helpful Information

Pay Securely With...